Chapter 2 Basic Operation During a Meeting
57
Chapter 2
When connecting with the V.35 interface with RS-366
When using single channel, enter the telephone number in the A1 box.
When using dual channels, enter the telephone numbers in the A1 and
A2 boxes.
Note
When connecting with the V.35 interface without RS-366 or
connecting with the RS-499 interface, the telephone number boxes are
not displayed.
When connecting on a LAN
Enter the IP address (or host name and domain name) of the remote
party to have a meeting with in the IP Address box.
Move the joystick up or down to select the box, then enter the
telephone number or IP address with the number buttons on the
Remote Commander.
• To delete a telephone number or IP address, press the STILL IMAGE
(CLEAR) button on the Remote Commander. The number or IP
address entered is deleted.
• To copy a telephone number, press the CAMERA (LINE COPY)
button. The number entered are copied to the next box.
• To delete the last number, press the PinP (BACK SPACE) button on
the Remote Commander. The last number is deleted.
4
Select the prefix setting.
Select Prefix with the joystick on the Remote Commander, then press
the joystick. Select the desired setting by moving the joystick up or
down, then press the joystick.
Prefix-None: Does not use the prefix number.
Prefix-A: Uses the setting A set in the Dial Setup menu.
Prefix-B: Uses the setting B set in the Dial Setup menu.
Prefix-C: Uses the setting C set in the Dial Setup menu.
Pressing the HELP button on the Remote Commander allows you to
check the prefix settings.
For details on the setting up the prefix number, see “Dial Setup Menu” on
page 32.
(Continued)
