101
Displaying the Machine Status
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Second Camera
Displays the name of the second camera.
The Communication Mode Status menu
shows the status of current communication
when communication is in progress, and the
status of previous communications when
communication is not in progress.
The ISDN Line Status, LAN Line Status or
LAN Connection Status will also be
displayed depending on the line interface
used.
Communication Mode Status
The current communication status will be
displayed. When two or more points are
connected to the system, selecting “Next” in
the lower part of the page displays the next
page.
For the items described with both “(Encode)”
and “(Decode)”, the descriptions under
“(Encode)” show the setting status of the local
system and those under “(Decode)” show the
status of the receiving.
Far End Terminal Name
Displays the terminal name of a remote
party.
Remote Address
Displays the address of a remote party.
Audio Mode
Displays the current audio encoding format.
Video Mode
Displays the current video encoding format.
“H.264 HP” appears during H.264 High
Profile communication, and “H.264”
appears during H.264 Baseline Profile
communication.
The audio encoding and video encoding
formats used for communication with a remote
party may differ from the settings in this menu,
depending on the status of the system on the
remote site.
Frame Rate
Displays the maximum frame rate of motion
pictures.
Rate
Displays in real time the number of
connected lines and their transfer rates.
Line I/F
Displays the line interface being used.
Camera Control
Displays whether the unit is ready to operate
both cameras.
H239
Displays whether the unit is ready to use the
H.239 presentation mode.
Check Code
Displays the encryption check code.
The LAN line status will be displayed on
one page for each point connected to the
system. The connected point is shown at the
upper left corner of each page. Selecting
“Next” in the lower part of the page displays
the next page.
Bit rate - Encode
Displays by category (audio, video and
H.239 (presentation)) the transfer rates for
sending data.
Bit rate - Decode
Displays by category (audio, video and
H.239 (presentation)) the transfer rates for
receiving data.
Number of lost packets
Displays by category (audio, video and
H.239 (presentation)) the number of packets
lost during transfer on the network.
Number of recovered packets
Displays by category (audio, video and
H.239 (presentation)) the number of lost
packets that were recovered with the
system’s QoS function.
Communication Mode Status
Note
LAN Line Status
