163
Using the Computer Picture for Presentation
C
hap
te
r 4:
C
o
n
nec
tio
n
w
ith
O
p
tio
nal
Equ
ipm
en
t
To configure the presentation mode, set “H.239” to “On” on the IP: Mode page
(page 69) or on the ISDN: Mode page (page 70) of the Communication setup
menu.
To start a presentation
1
Press the TOOLS button on the Remote Commander to open the Tools
menu.
2
Press the
b
button on the Remote Commander and press the
V
,
v
,
B
or
b
button to select “Execute” for “Presentation”.
The RGB picture from the computer is transmitted to the remote party.
While presentation is being executed, the message “Executing” appears on
the screen.
You can also transmit the computer picture to the remote party by pressing the
PRESENTATION button on the Remote Commander instead of performing steps
1 and 2 above.
To stop the presentation
Select “Stop” for “Presentation” in the Tools menu and press the ENTER
button on the Remote Commander. Transmission of the computer picture
stops.
You can also stop the presentation by pressing the PRESENTATION button
on the Remote Commander.
Note
Presentation
Streaming
Recording
Annotation
[Executing]
[Suspended]
[Suspended]
[Suspended]
Icon display
Reject Answer
Screen Capture
Tools
Machine Status
Setup
Home
On
Off
Execute
Execute
Execute
Execute
Stop
