203
Starting a Multipoint Connection
C
h
ap
te
r 6:
M
u
lti
p
oi
nt
C
onn
ec
tion
The
(multipoint) mark is added to the lower right of the selected name
in the Phone Book list and the remote party is specified to the party for the
multipoint connection.
You can add the
marks to up to eight parties using the same procedure
as above. The
marks that correspond to the number of the parties you
have selected appear as dark marks on the upper right of the Phone Book.
To delete the
mark from the name list, press the
button on the Remote
Commander again, or press the ENTER button to display the submenu, press the
V
,
v
,
B
or
b
button to select “
Off”, then press the ENTER button.
3
Select one of the remote parties with the
mark.
4
Press the CONNECT (
) button on the Remote Commander, or press the
ENTER button on the Remote Commander to display the submenu, press
the
V
,
v
,
B
or
b
button to select “Connect”, then press the ENTER button.
The system begins dialing the remote parties with the
marks. “Dialing”
appears on the monitor screen.
When the system connects to all the remote points, the message “Session
Connected.” appears on the screen, and the pictures of the remote parties
are displayed on the screen.
Note
Default Group
Phone Book
Room 101
ISDN 01-2345-6789
Cancel
Connect
Edit
Copy
Delete
On
Default Group
Phone Book
Office A
Room 102
Room 101
ISDN 98-7654-3210
IP 255.255.255.255
ISDN 01-2345-6789
Number of specified points
Multipoint mark
