48
Setting Up the System Immediately after the Installation – Initial Setup Wizard
2
Select the line interface to be used.
Which is your Line I/F?:
Select from among IP, ISDN and SIP.
Which is your primary Line I/F?:
If you select two or more interfaces
with “Which is your Line I/F?”, select the interface you most use.
Select from among IP, ISDN and SIP.
3
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Save”,
then press the ENTER button.
The setup wizard appears.
To set up a LAN connection
Select “Set up LAN” in the setup wizard, then set up a LAN connection.
To set up an ISDN line
Select “Set up ISDN” in the setup wizard, then set up an ISDN line connection.
To set up a SIP
Select “Set up SIP” in the setup wizard, then set up a SIP connection.
Select Line I/F
Wizard
Which is your Line I/F? (Multiple selection available)
I P
Which is your primary Line I/F?
I S D N
S I P
I P
I S D N
S I P
Cancel
Save
Select Line I/F
