113
Setting Up the Network Configurations
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
SIP (UC) will be supported in future version updates.
Restrictions when using SIP (UC) connections
• The Communication System supports only the audio/video communication
function of Microsoft Lync Server.
• Connecting to Microsoft Lync Server and conducting multipoint
conferences is not possible.
• The distinguishing features of Lync (e.g., hold transferring, chat, application
sharing) and the distinguishing features of PCS (e.g., annotation,
presentation, far end camera control) cannot be used.
• When the optional PCSA-MCG109 HD MCU software is installed on a PCS
terminal, up to one Lync client and up to seven other terminals (not main)
can be connected to the PCS terminal via IP. (Connection to Lync clients is
limited to one.)
Configuration example
1
In the “Other” (Administrator7) page of the Administrator setup menu, set
“SIP (UC) Mode” to “On”.
The SIP (UC) setup menu buttons appear in the setup menu screen.
SIP (UC) Connections
Note
SIP (UC) server
192.168.0.101
AD server
192.168.0.102
PCS
192.168.0.1
user2
password2
example.com
Lync client
192.168.0.11
user1
password1
example.com
Setup
Other
Administrator
Save Setup
Load Setup
Use History
AMX Device Discovery
HOP
Auto Restore
Internet Protocol
SIP(UC) Mode
Execute
Cancel
Execute
Off
Off
IPv4
On
On
1
Save
Administrator7
