152
Selecting the Input Picture and Sound
Selecting the Input Picture and Sound
You can switch the picture displayed on the monitor screen, and switch
between the input picture and audio.
When the displayed picture on the monitor can be switched during
communication, pressing the LAYOUT button on the Remote Commander
displays the indication “F1: Switches the monitored picture between the
remote and local sites.” at the bottom of the monitor.
Each press of the F1 button on the Remote Commander switches the displayed
picture between those on the local and remote sites.
1
Press the VIDEO INPUT button on the Remote Commander.
The Video Input > Near menu appears.
2
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select the video
input on the local site, then press the ENTER button.
The picture input from the selected equipment is displayed on the monitor
screen.
CAMERA:
Selects the picture from the camera connected to the
CAMERA connector.
HDMI:
Selects the picture from the equipment (second camera, etc.)
connected to the HDMI IN connector.
DVI-I 1:
Selects the picture from the equipment connected to the DVI-I 1
IN connector.
DVI-I 2:
Selects the picture from the equipment connected to the DVI-I 2
(PC) IN jacks.
The “HDMI” setting is not available on the PCS-XG77/XG77S.
Switching the Displayed Picture between the Local and Remote
Pictures
Selecting the Input Picture
Note
Save
Cancel
DVI-I 2
DVI-I 1
HDMI
CAMERA
Video Input > Near
