35
System Connections
C
h
apt
er
1:
In
st
al
la
tio
n
and
Pr
e
par
at
io
n
• Normally, connect the UTP cable to the
1 (LAN1) connector (indicated in green).
If the UTP cable is connected to the
2 (LAN2) connector, some of the functions
of your system may be restricted.
For details, see “Restrictions on the Use of LAN2 (PCS-XG100/XG100S
only)” on page 103.
• The REC OUT jack is used to make an audio recording of a communication. This is
not used during regular communication.
System Connection via a LAN
Notes
SRG-120DH HD Camera Unit
6)
to HDMI,
VISCA IN,
DC 12V
PCS-XG100S/XG77S
1)
HD
Visual Communication System
Camera cable
Power cord
4)
to CAMERA
to LAN
TV monitor
5)
to a wall outlet
to DC19.5V
AC adaptor
3)
to a wall outlet
1) The HDMI IN, HDMI-2 OUT, and
2
connectors are not available on the
PCS-XG77S.
2)
connector on the PCS-XG77S
3) Supplied
4) Supplied (Japan only)
5) Not supplied
6) Supplied with the PCS-XG100/XG77
UTP cable (category 6, straight)
5)
PCS-A1 microphone
to MIC (A1)
to 1
2)
to
HDMI-1
OUT
HDMI cable
3)
to HDMI IN
