46
Setting Up the System Immediately after the Installation – Initial Setup Wizard
Setting Up the System Immediately
after the Installation – Initial Setup
Wizard
When you turn on the Communication System for the first time after
installation and the self-diagnosis is completed, the setup wizard appears on
the monitor screen. Register your local system data with the setup wizard using
the Remote Commander.
You can change the settings made with the setup wizard later using the setup
menus.
The setup wizard will also be displayed when you install the PCSA-B384S or PCSA-
B768S ISDN Unit to your system later. Perform the setup again.
To select the on-screen language
1
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Select
Language” in the setup wizard, then press the ENTER button.
Note
Back to Tools
English
2007.11.29 14:21
IP
XXX.XXX.XXX.XXX
Wizard
5/11/2008 13:00
IP:192.168.0.11
Home
Select Language
Set Region and Clock
Select Line I/F
Set up LAN
Set up ISDN
Set up SIP
Wizard
Select Language
5/11/2008 13:00
IP:192.168.0.11
Select the on-screen language.
English
Cancel
Save
Select Language
