70
Registering Local Information
H.239 Ratio
When H.239 presentation transmissions are
made with the system, the H.239
presentation data shares bandwidth with
camera images that are also being sent. This
setting allows you to select how much of the
total bandwidth to use for H.239
presentation data transmissions.
2/3:
Use 2/3 of the total bandwidth for H.239
presentation data transmissions.
1/2:
Use 1/2 of the total bandwidth for H.239
presentation data transmissions.
1/3:
Use 1/3 of the total bandwidth for H.239
presentation data transmissions.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
When “Individual Settings for Transmission/
Reception” or “Individual Settings for Point-
to-Point/Multipoint” on the IP page is set to
“On”, you can set this item for transmission
and reception, and point-to-point and
multipoint connections individually.
You can select from among 1080, 720,
W4CIF, W432P, WCIF, 4CIF, CIF, QCIF
and AUTO.
The “1080” setting can only be selected on the
PCS-XG77/XG77S when the PCSA-RXG77
HD Upgrade Software is installed. Progressive
video signals with a resolution of 1920 × 1080
can only be transmitted and received at a
maximum of 60 frames per second when
“Screen Size” is set to “1080”.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
When “Individual Settings for Transmission/
Reception” or “Individual Settings for Point-
to-Point/Multipoint” on the IP page is set to
“On”, you can set this item for transmission
and reception, and point-to-point and
multipoint connections individually.
You can select from among H.261, H.263+,
and H.264.
“H.261” will be supported in version 2.0.
Video Frame
Allows you to select the number of video
frames during transmission or reception. When
“Individual Settings for Transmission/
Reception” or “Individual Settings for Point-
to-Point/Multipoint” on the IP page is set to
“On”, you can set this item for transmission
and reception, and point-to-point and
multipoint connections individually.
15fps:
Send pictures at a maximum rate of
15 frames per second.
30fps:
Send pictures at a maximum rate of
30 frames per second.
60fps:
Send pictures at a maximum rate of
60 frames per second.
AUTO:
Switch the number of frames
automatically.
• When using PCSA-CXG100 or EVI-H100V
HD camera units, transmission will be at a
maximum of 30 frames per second, even
when “Video Frame” is set to “60fps” or
“AUTO”.
• When the PCSA-RXG77 HD Upgrade
Software is installed on the PCS-XG77/
XG77S and progressive video signals with a
resolution of 1920 × 1080 are being
transmitted and received, transmission and
reception will be at a maximum of 60 frames
per second.
ISDN: Mode
ISDN is supported in version 1.41 and later.
ISDN Bandwidth (Dial)
Allows you to select the number of ISDN
lines used for dialing.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
Note
Note
Notes
Note
Communication
