Electrostatic discharge (ESD) can damage disk drives, add-in
cards, and other components. Follow the procedures described in the online document "Upgrading and
Maintaining Your VAIO Computer" only at an ESD workstation. If such a station is not available, do not work in
a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for
example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while
performing the procedure.
When removing a slot cover, be careful not to damage components on the system board or add-in cards. You
may need to temporarily remove add-in cards that are next to the slot cover you want to remove.
On Handling an LCD Display
Do not leave the LCD directly facing the sun for a long period of time as it can damage the LCD.
Do not scratch the LCD or exert pressure on it. This could cause malfunction.
Using the computer in low temperature conditions may produce a residual image on the screen. This is not a
malfunction. When the computer returns to normal temperature, the screen returns to normal.
A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The
image disappears after a period of time. You can use a screen saver to prevent residual images.
The screen becomes warm during operation. This is normal and does not indicate a malfunction.
The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/or
bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the
manufacturing process and does not indicate a malfunction.
On Handling a CRT Display
Do not place the display near a strong magnetic force.
Do not block the ventilation slots on the display.
On Using the Hard Disk Drive
Do not place the computer in a location that is subject to vibration
or shock.
Do not move the computer during operation.
Do not subject the computer to sudden changes in temperature.
Do not turn off the power while the computer is accessing the hard
disk drive.
On Handling Diskettes
Do not open the shutter manually and touch the surface
of the diskette.
Keep diskettes away from magnets.
Keep diskettes away from direct sunlight and other heat sources.
On Handling CD or DVD Media
Do not touch the surface of the disc.
Do not drop or bend the disc.
On Cleaning CD or DVD Media
Fingerprints and dust on the surface of a disc may cause read
errors. Proper care of the disc is essential to maintain its reliability. Do not use solvents such as benzine,
thinner, commercially available cleaners or anti-static spray, as they may cause damage to the disc.
For normal cleaning, hold the disc by its edge and use a soft cloth
to wipe the surface from the center out.
Page 105
Summary of Contents for PCV-R526DS - Vaio Digital Studio Desktop Computer
