PCV-RX463DS/RX465DS (UC)
Confidential
– 2 –
SECTION 5
SERVICE INFORMATION
5-1.
JUMPER SETTING ON HARD DISK DRIVE
The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Cable Select for Master/Slave
(Factory default)
Master
Slave (Jumper Packing Position)
Factory setting
Used setting
Master/Slave selection
Jumper setting
PK
KEY
CS
DS
Model
Part No.
Maker
Code
Capacity
(formatted)
PCV-RX465DS
A-8049-328-A
Quantum
Fireball AS60.0
60 GB
* Change the jumper setting cable select.
t
Master
Model
Part No.
Maker
Code
Capacity
(formatted)
PCV-RX463DS
A-8048-262-A
Seagate
ST340823A
40 GB
Master or single drive
Drive is a slave
Master with a non-ATA
compatible slave
Enable cable select
1
7
2
8
Factory setting
Master/Slave selection
Jumper setting
