96
Disc Operations
Chapt
er 5 Ope
rati
ons
in GUI
S
c
reens
Checking user-defined essence
marks
You can display the names of user-defined Shot Mark0 to
Shot Mark9 essence marks in planning metadata (UTF-8
format, maximum 32 bytes).
1
Display the Planning Metadata Properties screen
for the planning metadata loaded into this
unit.
The
,
button is enabled when the planning metadata
contains user-defined essence marks
2
Press
,
, and then turn the PUSH SET(S.SEL) knob.
The User Defined Essence Marks screen appears.
Formatting discs
See page 75 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the format.
3
Select OK, and then press the PUSH SET(S.SEL)
knob.
To cancel the format
Select Cancel, and then press the PUSH SET(S.SEL)
knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press the
PUSH SET(S.SEL) knob.
To exit the formatting screen
Press the PUSH SET(S.SEL) knob with Exit selected.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting in the
loss of recorded data, you can disable the Format Disc
command.
See page 75 for more information about GUI information.
1
Display the Disc Menu.
2
Select Settings, and then press the PUSH SET(S.SEL)
knob.
3
Select Setting Format Disc, and then press the PUSH
SET(S.SEL) knob.
4
Select Disable, and then press the PUSH SET(S.SEL)
knob.
Displaying disc and clip properties
in a web browser
By connecting this unit and a computer over a network,
you can display disc properties and clip properties in a web
browser installed on the computer (Web Thumbnail
function).
The Clip Properties page also allows you to download
high-resolution clip data, proxy AV data, and metadata
from this unit and to save that data on your computer.
Recommended browsers
The following browsers are recommended.
• Internet Explorer 7
1)
• Internet Explorer 8
1)
1) This function may not work properly in 32-bit versions of Internet
Explorer if you are using a 64-bit version of Microsoft Windows. You
should use a 64-bit version of Internet Explorer with 64-bit versions of
Windows.
To display the unit’s XDCAM web pages
1
Connect this unit and a computer to a network
.
Cancel
OK
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
