24
Front Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
n
s
o
f P
a
rts
A
Input signal display:
Displays the audio input signal.
.
B
Data indication:
Appears when the input signals are
non-audio signals.
C
Mixing:
Displays the input channels used for
audio mixing. (These channels are selected with setup
menu item 819 AUDIO INPUT ARRANGE.)
D
Monitor channel:
Displays the audio monitoring
channels set with MONITR L and MONITR R on
page P2 AUDIO of the function menu
E
Audio channel:
Displays the audio channels.
Also indicates preset or variable mode by its color
White:
Preset mode
Green:
Variable mode
F
Reference level:
Displays the reference level for
recording as set in the maintenance menu.
G
Level bars:
Display the audio recording or playback
levels of channels 1 to 8. The OVER indicators light
when the audio level exceeds 0 dB.
H
Meter display mode:
Displays the audio level meter
display mode selected with AU METER on page P4
AUDIO of the function menu
b
Function menu
Use the PAGE/HOME button to display this menu, and to
switch between the pages (HOME, P1 to P7, (P8)
1)
,
(HOME2)
1)
) of the menu. Each page has three to six
setting items. Press the corresponding button to change a
setting.
1) If a menu item is assigned using maintenance menu item M38: F-KEY
CONFIG
For details, see page 48 “Basic Operations of the
Function Menu” in Chapter 3.
c
Clip information
Displays clip information.
Clip names are displayed according to the setting of
Settings >Display Title in the Disc Menu
.
However, clip names are always displayed during
playback.
The following characters can be displayed as clip names in
this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, ,
(comma), -, . (period), /, : (colon), ; (semicolon), <, =, >,
?, @, [, ], ^, _, {, |, }, ~
• Space
d
Recording format
Displays the system frequency and the video and audio
formats.
e
Time data display area
A
Remaining disc recording capacity:
Displays the
amount of recording capacity remaining on the disc.
B
Rec Run/Free Run:
Displays the timecode run mode.
The run mode is set with RUN MODE on page P5 TC
of the function menu
Display
Input signal
ANA-1
Analog audio
signal
Channel 1, 3
ANA-2
Channel 2, 4
MIC-1
Input signal from
the microphone
connected to
ANALOG
AUDIO INPUT
connector
Channel 1, 3
MIC-2
Channel 2, 4
AES/EBU
AES/EBU format digital audio signal
(flashes when there is no input signal)
HD-SDI
HDSDI audio signal (flashes when
there is no input signal)
SD-SDI
SDSDI audio signal (flashes when
there is no input signal)
SG
Test signal from the internal signal
generator
No indication
Undefined audio signal, or no audio
input
F1600
PDW-HD1500
001/001 000:00
All remaining clips or clip list playback time
Total number of clips recorded on disc
Clip name
Number of current clip
8CH-24BIT
59.94i HD422-1080 50Mbps
System frequency
Video format
Audio format
A
Remaining disc recording capacity
B
Rec Run/Free Run
C
Timecode generator mode
D
VITC
E
Time data type
F
Time data
G
Recording mode indication
