84
Thumbnail Operations
Chapt
er 5 Ope
rati
ons
in GUI
S
c
reens
set to “Korean”, “Simplified Chinese”, or “Traditional
Chinese”.
The keyboard icon on the software keyboard is highlighted
when a USB keyboard has been recognized and enabled
for use with this unit, and the mouse icon is highlighted
and a mouse pointer appears when a USB mouse has been
enabled.
• Use the proper keyboard for the area of use. Some
characters may not be entered correctly if you use a
keyboard designed for use in another area.
• It is not possible to enter Japanese, even on a Japanese
keyboard.
USB keyboard special functions keys
In addition to the special function keys of the software
keyboard, you can use the following special function keys
on a USB keyboard.
USB mouse functions
You can use the mouse to move the cursor on the software
keyboard. You can also left click on a key to enter the
character for that key.
To change the speed of the mouse pointer:
Select the
desired speed using Settings >Select Mouse Pointer
Speed in the Disc Menu. Select the speed that works
best with the connected mouse.
To exit the software keyboard from a USB
keyboard
1
With the cursor in an edit box, press the Enter key to
move the focus to OK.
2
Do one of the following.
To confirm the edit and then exit the software
keyboard:
While OK is selected, press the Enter
key.
To discard the edit and then exit the software
keyboard:
On the USB keyboard, press the
r
key
or the Tab key to move to Cancel, and then press
the Enter key.
To continue editing:
Press any key except the Enter
key, the Esc key, and the Tab key.
Setting clip flags
You can set three types of clip flags (OK/NG/KP (KEEP))
during recording or playback. Setting these flags in each
clip that you record makes it easy for editors and other
colleagues to find and select the clips that they need.
See page 75 for more information about thumbnail screen
operations.
1
In the clip thumbnail screen, select the thumbnail of
the clip where you want to set a flag.
2
Display the Thumbnail Menu.
3
Select Set Clip Flag.
The clip flag setting screen appears.
Notes
Key
Function
V
,
v
When the cursor is in an edit box:
Move the cursor to the start or
end.
When “OK” or “Cancel” has the
focus:
Moves the focus between
“OK” and “Cancel”.
Delete
Deletes the character after the cursor.
Shift +
B
, Shift +
b
Selects the string before or after the
cursor.
Ctrl + C, X, V, A, Z
Ctrl + C:
Copies the selected string.
Ctrl + X:
Cuts the selected string.
Ctrl + V:
Pastes a copied or cut string.
Ctrl + A:
Selects the entire string.
Ctrl + Z:
Undoes the immediately
preceding operation.
Enter
When the cursor is in an edit box:
Moves the focus to OK.
When OK or Cancel has the focus:
Exits the software keyboard.
Esc
When the cursor is in an edit box,
moves the focus to Cancel.
Tab
Moves the focus between OK and
Cancel.
Thumbnail Menu
Set Clip Flag
Return to Upper Menu
OK
NG
KP (KEEP)
none
