8
Copying data in the CLIE handheld to the
Memory Stick media
Not only can you save data onto your computer using a HotSync
operation, but you can also save data inside the CLIE handheld to a
Memory Stick media using MS Gate.
Notes
• A Memory Stick media cannot be used if the remaining battery power is low,
because copying data consumes battery power. In this case, connect the AC
adapter.
• If the CLIE handheld receives infrared communication while copying or
moving data, the data copying or moving is stopped. Do not use infrared
communication while copying or moving data.
1
Insert a Memory Stick media into the CLIE handheld.
2
Rotate the Jog Dial navigator to select MS Gate on the Home
screen, and then press the Jog Dial navigator.
MS Gate starts, and a list of data in the CLIE handheld is displayed.
You can also start MS Gate by tapping the MS Gate icon.
3
Select the data you want to copy to the Memory Stick media
by tapping each file.
You can tap and select multiple files.
Note
You cannot copy data marked with
(copy-protected mark).
