background image

14

Hookup 1: Connecting the antenna only

Use this hookup to connect a VHF/UHF antenna (or separate VHF and
UHF antennas) to the video recorder.

Use an antenna cable to connect the signal source coming
from your wall to the VHF/UHF IN jack on the Video
Recorder.

Notes

• If your antenna is a flat cable (300-ohm twin lead cable), use an external antenna

connector (not supplied) to connect the antenna to the Video Recorder.

• If you have separate cables for VHF and UHF antennas, use a VHF/UHF band mixer

(not supplied) to connect the antenna to the Video Recorder.

Hookup 2: Connecting to a TV or VCR

Use this hookup if the signal source coming from your wall is already
connected to your TV/VCR via a single antenna socket.

1

Use an antenna cable (not supplied) to connect the signal
source coming from your wall to the single (input) jack of the
splitter (not supplied).

2

Use an antenna cable (not supplied) to connect one of the
splitter’s two output jacks to the VHF/UHF IN jack on your
TV or VCR.

Signal source

Video Recorder

Wall

Antenna cable (supplied)

To VHF/UHF IN

Summary of Contents for PEGA-VR100K





















































Reviews: