39
Operations
HQ (High Quality)
SP (Standard Play)
LP1 (Long Play 1)
LP2 (Long Play 2)
Recording TV Programs Manually
Follow the procedure below to record a TV program without setting the
timer REC preset.
1
Press
1
(power) on the Video Recorder.
The POWER indicator blinks momentarily and then stays lit in green.
2
Insert a “Memory Stick” media into the “Memory Stick” slot of
the Video Recorder and press /– to select the
channel or input source you want to record.
z
Hint
When you record from other equipment connected to the LINE IN jacks on the
Video Recorder, select LINE using /–.
3
Press DISPLAY to select the recording mode.
Each time you press , the front panel display changes in
the following sequence.
Notes
• When you select LP1 or LP2, the sound will be recorded in monaural. When you
record a stereo sound program, it is recorded in mono (L+R). When you select
LP1 or LP2, you cannot select the sound format.
• You cannot select SAP (Second Audio Program) manually.
4
Press
z
REC.
Recording starts and the REC indicator lights up in red.
Recording continues until you stop the recording or when the
“Memory Stick” media is full.
z
Hint
The maximum recording time is two hours.
Note
While recording, you cannot change [REC Mode].
continued
Summary of Contents for PEGA-VR100K
Page 1: ...Video Recorder Operating Instructions 2003 Sony Corporation PEGA VR100K 4 679 184 11 1 ...
Page 50: ......
Page 51: ......
