Before requesting service
If a device that causes radio interference such as a
microwave oven is nearby, system communications may not
work properly.
The Web page does not display properly.
Certain content, such as content that requires specialized
software, may not display properly on some Web pages.
Bluetooth
®
The Bluetooth
®
device cannot be registered, or paired, with
the PSP
™
system.
There may be too much distance between the system and
the Bluetooth
®
device.
The Bluetooth
®
device may not be compatible with the
profiles that are supported by the system.
The maximum number of Bluetooth
®
devices that can be
paired is eight. Try deleting a registered device to pair a
new device.
A connection cannot be established between the Bluetooth
®
device and the PSP
™
system.
Check that the Bluetooth
®
device is paired with the system.
If it is not paired, go to (Bluetooth
®
Device Settings)
[Manage Bluetooth
®
Devices] [Register New Device] to
pair the device.
Check that the Bluetooth
®
device is turned on.
If the Bluetooth
®
device has been reset, you must pair it
with the system again.
There is no sound from the Bluetooth
®
device.
Check that the Bluetooth
®
device is not set in mute mode.
Try adjusting the volume on either the Bluetooth
®
device or
the PSP
™
system.
There is noise. The sound is not continuous.
If there are obstacles such as walls between the PSP
™
system and the Bluetooth
®
device, change the location of
the devices and then connect the Bluetooth
®
device again.
If a device that causes radio interference such as a
microwave oven or an induction cook top or appliance is
nearby, communication with the system may not work
properly.
There is a delay in the audio.
Due to the characteristics of Bluetooth
®
technology, there
may be a delay in the audio. If you feel the lag in the audio
is a problem, use wired headphones instead.
Other issues
The system or AC adaptor is warm.
During use, the system or AC adaptor may become warm.
This is not a malfunction.
When the communication function is being used, the
system may become warmer than during normal use. This
is not a malfunction.