ID
Diagnosis
Error value
Type1/2
Note
0x0d
Version matching test (sub-micro-
computer of the rear panel)
-1: Error
1, 2
Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
0x0e
Version matching test (sub-micro-
computer of the outside panel)
-1: Error
1, 2
Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
0x0f
Version matching test (sub-micro-
computer of the viewfinder)
-1: Error
1, 2
Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
Item6 (Power block diagnosis)
The power block diagnosis tests the following contents.
ID
Diagnosis
Error value
Type1/2
Note
0x01
Power switch read
-1: The power switch cannot be read.
1, 2
The power switch must
be set to ON.
-4: Diagnosis is disabled because the
power switch is not set to ON.
0x02
Battery recognition
-1: Communication with battery is
disabled.
1, 2
An appropriate battery
must be connected.
-4: Diagnosis is disabled because no
battery is connected.
0x03
Power supply state
-1: Power supply is not controlled
correctly.
1, 2
The power switch must
be set to ON.
-4: Diagnosis is disabled because the
power switch is not set to ON.
Item7 (Diagnosis between image processor and display block)
Diagnosis between the image processor and the display block tests the following content.
ID
Diagnosis
Error value
Type1/2
Note
0x80
Video signal line test
-1: Test pattern check error
1, 2
Video signal line test between
the camera signal processor IC
and the baseband processing IC.
Monitor output images will be
distorted during the test.
Item9 (Diagnosis between display block and media block)
Diagnosis between the display block and the media block tests the following contents.
ID
Diagnosis
Error value
Type1/2
Note
0x91
Video signal line communication test
in playback direction
(Direction from MEDIA to DIS-
PLAY)
-1: Test pattern check error
1, 2
—
PMW-300
3-12
