3-4 (E)
PMW-EX1R
3-3. Self-Diagnostic
Function
Self Diag of INFORMATION menu enables the user to execute self-diagnosis of the equipment. When
Self Diag is run, the result of self-diagnosis appears regardless of whether the result is good or bad.
The self-diagnosis can be executed only under the following conditions. When executing the self-diagno-
sis, change to the following conditions with the SHUTTER switch and the SETUP menu.
.
SHUTTER switch: Off
←
lower front of the unit
.
EX Slow Shutter: Off
←
CAMERA menu
.
Country:
NTSC Area
←
OTHERS menu
.
Video Format:
HQ1080/60i
←
OTHERS menu
1. Self-diagnostic
items
The following two types of self-diagnosis are provided.
In addition, since the system cannot be returned to normal operations after the self-diagnosis, the
power must be turned off and on again.
.
Type1: Simple self-diagnosis
Use to execute a simple version of the self-diagnosis. This
fi
nishes in a short time.
.
Type2: Complete self-diagnosis
This executes all items included in the Self Diag. Since complete self-diagnosis involves a memory
test and a complicated device test, this requires time to be completed.
Self-diagnostic item list
Item No.
Self-diagnostic item
Description
Item1
Image processor block
Diagnosis of lens, CMOS block, and camera block
Item2
Display block
Diagnosis of video signal system (LCD and base band signal
processing)
Item3
Media block
Diagnosis of media recording and playback (encoder, decoder,
memory card, i.LINK and USB interface)
Item4
Audio block
Diagnosis of audio input and output
Item5
System controller block
Diagnosis of system controller system
Item6
Power block
Diagnosis of power supply system
Item7
I/F between image processor
Diagnosis of the signal line from camera signal processor IC to
and display block
base band processing IC
Item8
Video I/F while recording between
Diagnosis of the video signal line (recording direction) from base
display and media block
band processing IC via encoder IC to AVIT signal processing IC
Item9
Video I/F while playing back
Diagnosis of the video signal line (playback direction) from AVIT
between display and media block
signal processing IC via decoder IC to base band processing IC
Item10
Audio I/F while recording between
Diagnosis of the audio signal line (recording direction) from base
display and media block
band processing IC to AVIT signal processing IC
Item11
Audio I/F while playing back
Diagnosis of the audio signal line (playback direction) from AVIT
between display and media block
signal processing IC to base band processing IC
Item12
Do not execute this item.
Item13
Do not execute this item.
