Error/Warning Indications
113
Ap
pend
ic
es
The following caution and operation confirmation indication may be displayed on the center area of the
screen. In this case, please see the following table.
Caution and Operation Confirmation Indications
Indication
Cause and measures
Battery Error
Please Change Battery
An error was detected with the battery pack.
Replace the battery pack with a normal one.
Backup Battery End
Please Change
The remaining power of the backup battery is insufficient.
Replace the battery pack.
Unknown Media(A)*
Please Change
A partitioned memory card or one that contains recorded clips exceeding the
number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and load a compatible
card.
Cannot Use Media(A)*
Unsupported File System
A card of a different file system or an unformatted card was inserted. It cannot
be used with this camcorder.
Replace it or format it with this camcorder.
Media Error
Media(A)* Needs to be Restored
An error occurred with the memory card. The card requires restoration.
Restore the card.
Media Error
Cannot Record to Media(A)*
Recording cannot be done, because the memory card is defective.
Because playback may be possible, it is recommended to replace it with another
card after copying the clips, as required.
Media Error
Cannot Use Media(A)*
Neither recording nor playback can be done, because the memory card is
defective.
It cannot be operated with this camcorder. Replace it with another card.
Media(A)* Error
Recording Halted
Playback Halted
Recording or playback stops, because an error occurred with the memory card.
If this frequently occurs, change the memory card.
Media Reached Rewriting Limit
Change Media (A)*
The memory card comes to the end of its service life. Make a backup copy and
replace the card with another one as soon as possible. Recording/playback may
not be performed properly if you continue to use the card.
For details, refer to the operating instructions of the memory card.
Copy All MPEG2 Proxy
NG: Reached Clip Number Limit
NG: Same File Already Exists
NG: Not Enough Capacity
Copying of All the MPEG2 Proxy is not completed because of the displayed
reason.
• The maximum number of clips is reached.
• There is a file with the same name.
• There is not enough capacity for copying.
Replace the Media.
Input AES/EBU is Invalid Emphasis Emphasis signal that is not compatible with the AES/EBU input is input.
The camcorder is compatible with 50u-15u Emphasis only.
Input AES/EBU is not Pro Use
Signal other than Professional Use is input to the AES/EBU input.
The camcorder is compatible with Professional Use only.
Fan Stopped
The fan in the camcorder has stopped.
Avoid use under high temperature conditions. Turn the camcorder off and
contact a Sony service representative.
AXS Recorder Fan Stopped
The fan in the AXS-R5 that is connected to the camcorder has stopped.
Avoid use under high temperature conditions. Remove the AXS-R5 from the
camcorder and contact a Sony service representative.
Abnormal Lens Communication
Please Check “Lens IF” Setting
The type of the connected lens does not match with the camcorder’s setting.
Check the “Lens Interface” setting of the Camera menu.
Summary of Contents for PMW-F5
Page 134: ......
