Sub Display Setting Items
55
Se
tt
ings
AU/TC-2
AU/TC-3
Item name
Setting
Monitor CH
Selects the audio channel that is output to the headphones and speaker. (See page
for
the selectable item.)
When the CBK-55BK is attached
The status of the MONITOR switch on the CBK-55BK is displayed.
Monitor Level
Adjusts the monitor volume from 0 to 99.
When the CBK-55BK is attached
This item does not appear because the setting of the item is adjusted on the MONITOR
knob on the CBK-55BK.
Item name
Setting
Display
Switches the indication for the time data (Timecode/Duration).
Reset
Resets the timecode and counter to 00:00:00:00.
Set
Sets the timecode to the desired value.
Mode
Sets the timecode mode.
Preset (Ext): Starts the timecode from the specified value.
Int. Regen (regeneration): Starts the timecode from that of the previous clip.
Run
Sets the condition for the timecode.
Rec Run: Advances the timecode during recording only.
Free Run: Keeps advancing regardless of the state of recording.
TC Source
Displays the external lock status for the timecode.
Internal: The timecode is not locked when “S&Q Motion” is set to “Off” and timecode is
set to “Preset (Ext-Lk)” and “Free Run.”
External: The timecode is locked when “S&Q Motion” is set to “Off” and timecode is set
to “Preset (Ext-Lk)” and “Free Run.”
No indication: Other than above.
Summary of Contents for PMW-F5
Page 134: ......
