Sub Display Setting Items
52
Se
tt
ings
The item names and its settings are listed below.
Note
When the CBK-55BK (EFP Style Buildup Kit) is attached to the camcorder, some operations and settings are limited.
CAMERA-1
Sub Display Setting Items
CAMERA Screen
Item name
Setting
S&Q FPS
On: Turns the Slow & Quick motion mode on, and sets the frame rate. (See
for
the selectable item.)
Off: Turns the Slow & Quick motion mode off.
Shutter
Sets the electronic shutter speed and shutter angle.
Select from following 11 types of items.
Off: Turns the electronic shutter function off.
Value of Step Shutter: Selects from 8 types of presets that are registered as Step Shutter.
(You can change the preset value after selecting.)
Continuous: Selects the available speed/angle. (See
for the selectable item.)
SLS: Selects the slow shutter function. (Set the number of frames to accumulate after
selecting.)
When the CBK-55BK is attached
The SHUTTER switch on the CBK-55BK takes priority.
If the SHUTTER switch is set to OFF, “Value of Step Shutter” and “Continuous” cannot
be selected.
If the SHUTTER switch is set to ON, “Off” cannot be selected.
Color Temp
Sets the color temperature of the white balance.
Preset 3200K/4300K/5500K: Sets the white balance to the preset value of color
temperature 3200K/4300K/5500K.
Memory A/Memory B: Sets the color temperature of the white balance that is stored on
the white memory A or B.
Note
“Memory A”/”Memory B” cannot be selected when “Shooting Mode”
is set to
“Cine EI.”
When the CBK-55BK is attached
The WHITE BAL switch on the CBK-55BK takes priority.
When “Shooting Mode”
is set to “Custom,” “Preset 3200K/4300K/5500K,”
and “Memory A/Memory B” cannot be changed on the sub display.
If the WHITE BAL switch is set to PRST, “Memory A/Memory B” cannot be selected.
If the WHITE BAL switch is set to A or B, only the color temperature of the white
balance that is stored on the white memory on each Memory A/Memory B can be set.
If “Shooting Mode” is set to “Cine EI,” the preset value can be selected from Preset
3200K/4300K/5500K for each position of the WHITE BAL switch.
Summary of Contents for PMW-F5
Page 134: ......
