PRS-505.GB.3-277-508-01(2)
Shutting down Reader
If you will not be using the Reader for several days, the
power consumption of the battery can be minimized by
shutting down the Reader.
In the Home menu, press
/
to select “Settings,”
then press Enter.
The Settings menu appears.
Press
/
to select “Advanced Settings,” then press
Enter.
The Advanced Settings menu appears.
Press
/
to select “Device Shutdown,” then press
Enter.
Press (MARK) to shut down the Reader.
Notes
• When turning on by sliding the POWER switch from this state, the
Reader may take a few moments to turn on.
• When you connect the Reader to your computer after shutting
down, it is necessary to turn on the Reader again. Otherwise, it
takes about 40 minutes until
(indicating connection via USB) is
displayed, and you will not be able to turn on the Reader by the
POWER switch during this time. The indicator lights up in red while
is not displayed, and the Reader is charged. In this case,
disconnect the USB cable from the Reader, then turn on the
Reader and reconnect it.
66
US
