22
Maintenance
Cleaning the Stylus
The stylus is a high precision component.
Handle it with care to avoid damage.
Use a commercial cleaning product for
cleaning the stylus.
Replacing the Stylus
The stylus may become worn out, damaged,
or dirty beyond cleaning depending on
your use case. In such a case, replace the
stylus.
To obtain a spare stylus, contact your dealer
or the customer support website. (See page
28
.)
Note
• Do not use a replacement stylus made by
another company.
• Be sure to attach the stylus protective cover
before you replace the stylus so as not to harm
your fingertips or damage the stylus.
To remove the stylus
1
Turn off your turntable and the
connected audio device and unplug
the AC adaptor from the power
outlet.
2
Attach the stylus protective cover to
the stylus.
3
Hold the cartridge body (
) with
one hand, grasp the stylus with the
other, and then pull the stylus in the
direction of the arrow to remove it
from the cartridge body.
To attach the stylus
1
Attach the stylus protective cover to
the spare stylus.
2
Hold the cartridge body (
) with
one hand and then insert the tab on
the spare stylus into the receptacle
on the cartridge body.
3
Push the stylus in the direction of
the arrow until it clicks into place.
