Setting the video output on the PS3™ system
1
Go to
(Settings)
(Display Settings).
2
Select [Video Output Settings].
3
Select [HDMI].
4
Select [Auto].
5
Verify the settings, select [Yes] and then press the button.
6
Set the display size to 24 inches.
7
Verify the settings, select [Yes] and then press the button.
Hint
When using this setting, connect the PS3™ system to the 3D display directly using
an HDMI cable. If the display and the PS3™ system are connected via an AV
amplifier or other device, this setting may not work correctly.
Navigating the menu
Picture
Backlight
Adjusts the brightness of the backlight
Picture Mode
[Standard]: Provides a standard natural
looking picture appropriate for home use
[Dynamic]: Provides a bright picture with
emphasis on sharpness and contrast
[Cinema]: Provides a picture optimized for
watching movies
[Custom]: Applies custom picture settings
Reset Current
Mode
Resets all picture settings to default values
Screen
*
Wide Mode
[Normal]: Displays the picture in its
original size
[Full]: Displays the picture in full-screen
mode
[PSP™ Zoom]: Displays the picture from
a connected PSP
®
(PlayStation
®
Portable)
system in full-screen mode
Overscan
Select [ON] when visual noise or a black
frame can be seen around the edges of
the screen
Sound
Sound Mode
[Standard]: Provides a well-balanced,
natural sound over the entire range
[Dynamic]: Provides a clear sound with
emphasis on high and low frequencies
[Cinema]: Provides a sound with a feeling
of you-are-there immediacy, just like being
in a movie theatre
[Custom]: Applies custom sound settings
Reset Current
Mode
Resets all sound settings to default values
Balance
Adjusts the volume balance between the
left and right speakers
3D
3D Format
Adjusts the settings to match the 3D
format of the content being played when
the 3D image is not displayed properly
