1. To change main modes just tap
Select
button 1 time and you will see that
4th LED
will
blink 1 time and stay ON. If blink 1 time then it Mode1.
2. Tap again
Select
button 1 time and you will see that
4th LED
will blink 2 times and stay
ON. 2 blinks mean Mode2.
3. Tap again
Select
button 1 time and
4th LED
will blink 3 times. 3 blinks mean Mode3. Very
easy.
If you continue tap
Select
button then you will see that
4th LED
will blink 4, 5, 6, 7, 8 and 9 times.
This is mean Mode4, 5, 6, 7, 8 and 9. After Mode9 will be again Mode0. All modes in a circle.
So, if you need Mode7 then tap
Select
button 1 time and count how much times
4th LED
blinking.
For example
4th LED
blinking 2 times. This is mean you are on Mode2. You need Mode7
(Mode2+5=Mode7). Tap
Select
button 5 more times. Don't need wait and count
4th LED
blinking
after each push of
Select
button. Just tap "Select" button 5 times and after that count
4th LED
blinking.
4th LED
should blink 7 times.
Default modes and modes explanations.
Click here to show/hide default modes
Click here to show/hide modes explanations
1st sub-mode and 2nd sub-mode.
All modes have option to change 1st sub-mode and 2nd sub-mode. What this mean?
Also very easy. Now you know how to choose any mode.
For example we want change setting of Mode4. Tap
Select
button a few times until
4th LED
will
blink 4 times. 4 blinking is Mode4.
Look on the Mode4. You will see that 1st sub-mode can be Dual, Akimbo or Auto Aim. This is
mean that Mode4 can be Dual, Akimbo or Auto Aim. If you change 1st sub-mode to Akimbo then
if next time you choose Mode4 then Mode4 will be Akimbo. Current setting is Auto Aim.
Also you can see that 2nd sub-mode can be None, Drop Shot or Jump Shot. If you change 2nd-sub-
mode to Drop Shot then when you push R1 button to Rapid Fire then the same time will be Drop
Shot. And next time if you choose Mode4 then Mode4 will be with Drop Shot.
So you can make Mode4 to be:
1. Dual
2. Akimbo
3. Auto Aim
4. Auto Aim Normal
5. Dual with Drop Shot
6. Akimbo with Drop Shot
7. Auto Aim with Drop Shot
8. Auto Aim Normal with Drop Shot
9. Dual with Jump Shot
10. Akimbo with Jump Shot
11. Auto Aim with Jump Shot
12. Auto Aim Normal with Jump Shot
Other modes also can be with different features.
Summary of Contents for PS3 INFIMOD
