000
5. Menu Display and Settings: Setup Menu List
57
Paint >White Clip
Sets white clip adjustment settings.
Item
Sub-item setting
Description
Setting
On
/ Off
Turns the white clip adjustment function on/
off.
[Notes]
ˎ
ˎ
The setting is reset to On when the camcorder
is turned off. To set to Off permanently, set Level
to 109%.
ˎ
ˎ
Cannot be set when Gamma >Gamma Category
is set to S-Log2 or S-Log3.
Level
90.0% to 109.0%
The default setting varies depending on the
country of purchase.
NTSC Area:
108.0%
PAL Area:
105.0%
Sets the white clip level.
Paint >Detail
Sets detail adjustment settings.
Item
Sub-item setting
Description
Setting
On /
Off
Turns the detail adjustment function on/off.
Level
–99 to +99 (
±0
)
Sets the detail level.
H/V Ratio
–99 to +99 (
±0
)
Sets the mix ratio between the H detail level
and the V detail level.
Crispening
–99 to +99 (
±0
)
Sets the crispening level.
Level Depend
On
/ Off
Turns the level dependence adjustment
function on/off.
Level Depend
Level
–99 to +99 (
±0
)
Sets the level dependence level.
Frequency
–99 to +99 (
±0
)
Sets the center frequency of the detail (detail
thickness).
The detail is thinner the higher the center
frequency, and thicker the lower the center
frequency.
Knee Aperture On /
Off
Turns the knee aperture correction function
on/off.
Knee Aperture
Level
–99 to +99 (
±0
)
Sets the knee aperture level.
Limit
–99 to +99 (
±0
)
Sets the detail limiter for both the white-side
and black-side directions.
White Limit
–99 to +99 (
±0
)
Sets the white-side detail limiter.
Black Limit
–99 to +99 (
±0
)
Sets the black-side detail limiter.
Paint >Detail
Sets detail adjustment settings.
Item
Sub-item setting
Description
V Black Limit
–99 to +99 (
±0
)
Sets the black-side V detail limiter.
V Detail
Creation
NAM /
Y
/ G / G+R
Sets the signal source for creating the V
detail to NAM (G or R, whichever is higher), Y,
G, or G+R.
Paint >Skin Detail
Sets skin detail correction settings.
Item
Sub-item setting
Description
Setting
On /
Off
Turns the skin detail correction function on/
off.
Area Detection Execute / Cancel
Detects the color used for skin detail
correction.
Execute: Run detection
Area Indication On /
Off
Turns the function that displays zebra in
areas of the color used for skin detail
correction on/off.
Level
–99 to +99 (
±0
)
Sets the skin detail level.
Saturation
–99 to +99 (
±0
)
Sets the saturation of the color targeted for
skin detail correction.
Hue
0
to 359
Sets the hue of the color targeted for skin
detail correction.
Width
0 to 90 (
40
)
Sets the range for the hue of the color
targeted for skin detail correction.
Paint >Aperture
Sets aperture correction settings.
Item
Sub-item setting
Description
Setting
On
/ Off
Enables/disables aperture correction
(processing that improves resolution by
adding a high-frequency aperture signal to
the video signal to correct deterioration due
to high-frequency characteristics).
Level
–99 to +99 (
±0
)
Sets the aperture correction level.
Paint >Matrix
Sets matrix correction settings.
Item
Sub-item setting
Description
Setting
On
/ Off
Turns the matrix correction function on/off.
