3
GB
GB
“Auto ND Filter” has been added to the “Auto
Exposure” of the Camera menu
. The
camcorder can adjust the density of the ND filter
automatically.
1
Set the ND FILTER mode switch
A
to
VARIABLE.
2
Set the ND FILTER switch
B
to 1, 2, or
3.
The ND filter mode is set to variable mode.
3
Set “Auto ND Filter” of “Auto
Exposure” in the Camera menu to
“On.”
Notes
• Switching the auto ND filter to on or off is enabled in
variable mode only.
• When the camcorder is in the preset mode or the ND
FILTER switch
B
is set to CLEAR, the auto ND filter
is disabled.
• When the Full Auto mode is set to on in the variable
mode, the density of the ND filter is automatically
adjusted, even if the auto ND filter is off.
• For details about the preset mode or variable mode,
refer to “Adjusting the volume of light (ND filter)” in
the Operating Guide.
“Network Client Mode” has been added to the
System menu
By enabling the network client mode and
connecting the camcorder to Connection Control
Manager (hereafter called “CCM”) of the PWS-
100RX1 network RX station (sold separately),
high quality streaming using the Sony QoS
technology is available.
1
Connect the camcorder to the network.
For details, refer to the “Connecting to Other
Device via Wireless LAN (PXW-X180
only)” or “Connecting to the
Internet (PXW-X180 only)” in “Firmware
update” for Ver. 2.0.
2
Set items of “Detail Settings” in
“Network Client Mode” of the System
menu.
• CCM Address: Input the address of the
connected CCM (Host name or IP address).
• CCM Port: Input the port number of the
connected CCM.
• User Name: Input the user name.
• Password: Input the password.
Adjusting the Image
Brightness (Auto ND
Filter)
Setting auto ND filter
High Quality Streaming
with the Network Client
Mode (PXW-X180 only)
Setting the network client mode
Continued
,
Summary of Contents for PXW-X160
