149
WRR Setting
Makes settings related to
the wireless tuner.
WRR Valid CH
Sel
All
/CH1
Selects whether to enable channels 1
and 2 of the wireless receiver (“All”) or
channel 1 only (“CH1”).
WRR CH Select
TX1
/TX2
Specifies the target channel for other
sub-items.
TX1:
Channel 1
TX2:
Channel 2
WRR Delay
Comp
On
/Off
Enables (“On”) or disables (“Off”)
delay compensation for wireless audio
input. (When “On” is selected, the audio
in all E-E output is delayed by about 8
ms.)
TX
---
Displays the name of the transmitter
whose signals are being received on the
channel selected by “WRR CH Select.”
TX Audio Peak
---
/Peak
Displays whether the AF level of the
transmitter whose signals are being
received on the channel selected by
“WRR CH Select” are over peak.
TX Input Level
---
/Mic/Line
Displays whether the input level of the
transmitter whose signals are being
received on the channel selected by
“WRR CH Select” is set to microphone
(“Mic”) or line (“Line”).
TX ATT Level
---
Sets the ATT level of the transmitter
whose signals are being received on the
channel selected by “WRR CH Select.”
(The setting range varies depending on
the transmitter.)
TX LCF Freq
---
Sets the low cut filter frequency of the
transmitter whose signals are being
received on the channel selected by
“WRR CH Select.” (The setting range
varies depending on the transmitter.)
TX System
Delay
Auto
/0.0ms to 8.0ms Specifies the amount of audio delay.
Auto:
Automatically adjusts the
amount of delay so that the delay in
the audio received from the
wireless transmitter is zero.
0.0ms to 8.0ms:
Sets the amount of
anticipated wireless system delay,
for cases in which several wireless
systems are being used over a
devices such as an audio mixer.
MAINTENANCE
Item
Sub-item
Setting
Description
Summary of Contents for PXW-X320
Page 223: ......
