150
Timecode
Makes settings related to
timecode.
TC Out
Auto
/Generator
Selects the source for timecode output.
Auto:
During recording, output values
generated by the timecode
generator, and during playback
output values obtained by the
timecode reader.
Generator:
Output values generated
by the timecode generator during
both recording and playback.
DF/NDF
DF
/NDF
When “Country” is set to other than
“PAL Area,” selects drop-frame mode
(“DF”) or non-drop-frame mode
(“NDF”).
LTC UBIT
Fix
/Time
Specifies the data recorded in LTC user
bits.
Fix:
Record user-specified data.
Time:
Record the current time.
Counter Display
Counter
/Duration
Select the method used to reset the
counter value displayed on the
viewfinder screen.
Counter:
Continue to increment until
the RESET button is pressed.
Duration:
Reset each time that
recording is started.
Essence Mark
Makes settings related to
shot marks and clip index
picture thumbnails.
Ret Shot Mark 1
On
/Off
Specify whether to input Shot Mark1
marks using the RET button on the lens.
Ret Shot Mark 2
On
/Off
Specify whether to input Shot Mark2
marks using the RET button on the lens.
Index Picture Pos
0sec
to 10sec
(in 1 sec steps)
Specifies which frame to use as the clip
thumbnail image
Find Mode
Clip
/Rec Start
Specify the frame to be cued up when
the PREV or NEXT button is pressed.
Rec Start:
The next frame or the
previous frame where a Rec Start
essence mark is set.
Clip:
Pressing the NEXT button moves
to the start frame of the next clip.
Pressing the PREV button moves
to the start frame of the current
clip. (Pressing the PREV button at
the start frame of the current clip
moves to the start frame of the
previous clip.)
MAINTENANCE
Item
Sub-item
Setting
Description
Summary of Contents for PXW-X320
Page 223: ......