174
Set the data in lens files on “FILE”
“Lens” in the setup menu .
You can set the following data and save it as a
lens file.
For details about menu operations, see “Basic Setup
Menu Operations” (page 115).
Insert an SxS memory card into a memory card
slot, then proceed as follows.
For details about menu operations, see “Basic Setup
Menu Operations” (page 115).
1
Select “FILE” > “Lens” in the setup
menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step
2
.
For details, see “To assign names to files”
(page 171).
2
Select “Lens Store SxS” > “Execute,”
and press the MENU knob.
When saving to internal memory, select
“Lens Store Mem” > “Execute.” When
saving to a USB flash drive (UDF, exFAT
modes), select “Lens Store USB” >
“Execute.”
3
Press the MENU knob.
A list box of lens file number appears. File
numbers where “No File” is displayed are
empty file numbers.
File numbers with a file name or a date and
time are the number of files that already
contain data.
4
Select the file number under which you
want to save the data, and then press the
MENU knob.
A confirmation message appears.
5
To execute the save, select “Execute,”
and then press the MENU knob.
To cancel the save, select “Cancel,” and
then press the MENU knob.
If you selected Lens Store SxS in step
2
, the
ACCESS lamp lights when you execute the
save (in blue on the right-side panel and in
orange in the card slot section). When the
data has been saved to the SxS memory card,
a completion message appears and the
ACCESS lamp goes out.
If saving to internal memory or a USB flash
drive, the ACCESS lamp does not light up.
Insert an SxS memory card into a memory card
slot, then proceed as follows.
For details about menu operations, see “Basic Setup
Menu Operations” (page 115).
1
Select “FILE” > “Lens” in the setup
menu.
2
Select “Lens Recall SxS” > “Execute.”
When loading from internal memory, select
“Lens Recall Mem” > “Execute.” When
loading from a USB flash drive (UDF,
exFAT modes), select “Lens Recall USB” >
“Execute.”
3
Press the MENU knob.
A list box of lens file number appears. File
numbers where “No File” is displayed are
empty file numbers.
Saving and Loading
Lens Files
Setting Lens File Data
Settings data
Sub-item
V modulation shading
compensation values
M V Modulation
Center marker position
Lens Center H
Lens Center V
Flare level
Lens R Flare
Lens G Flare
Lens B Flare
White balance
compensation value
Lens W-R Offset
Lens W-B Offset
White shading
compensation value
L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para
Saving Lens Files
Loading Lens Files
Summary of Contents for PXW-X320
Page 223: ......
