81
You can connect a device (such as a computer,
smartphone, or tablet, collectively referred to as
“device”) to the camcorder over a wireless LAN
connection by attaching an optional IFU-WLM3
USB Wireless LAN Module.
The following operations are supported between
the camcorder and devices connected by wireless
LAN using the IFU-WLM3.
• Using the Web menu
• Transferring planning metadata between the
camcorder and a device
• Camcorder remote operation using a device
Open the cover of the external device connector,
then connect the IFU-WLM3.
Notes
• The IFU-WLM3 (sold separately) may not be available
in some countries/regions.
• Attach/remove the IFU-WLM3 after the camcorder is
turned off.
• The CBK-WA101 Wireless Adapter cannot be used
when using an IFU-WLM3.
• An i.LINK connection and USB wireless LAN module
cannot be used at the same time.
When using a wireless connection with an IFU-WLM3
inserted directly into the external device connector, do
not connect a device to the i.LINK connector.
• If you use other wireless devices near the camcorder,
the camcorder may not work correctly. Turn any
wireless devices off that are near the camcorder.
To connect by wireless LAN using the IFU-
WLM3, two types of wireless LAN connections
are available. In “ad-hoc mode”, you can make a
peer-to-peer Wi-Fi connection between a device
and a camcorder. In “infrastructure mode”, you
can make Wi-Fi connections between a device
and multiple camcorders via a wireless LAN
access point (building a LAN).
To configure network settings
Change settings under “MAINTENANCE” >
“Network Setting” in the setup menu as required.
a) The IP address determined by DHCP server is
displayed here.
When you have changed a setting
Set the “Set” item to “Execute.” When a
confirmation message appears, turn the MENU
knob to select “Execute” and press the knob.
To make a connection in ad hoc mode
1
Configure network connection settings
on the device to be connected to the
camcorder.
2
Start a connection on the device.
3
Set “MAINTENANCE” > “Wi-Fi
Setting” > “Wi-Fi” to “Enable” in the
setup menu.
Connecting the
Camcorder to Devices
using the IFU-WLM3
USB Wireless LAN
Module
Connecting the IFU-WLM3
Connecting by Wireless LAN
using the IFU-WLM3
Item
Setting
DHCP
Setting that specifies whether to
acquire the IP address
automatically from a DHCP
server.
Enabled:
Acquire
automatically.
Disabled:
Do not acquire
automatically (factory
default setting).
IP Address
IP address
a)
(factory default
setting: 192.168.1.10)
Subnet Mask
Subnet mask (factory default
setting: 255.255.255.0)
Default Gateway
Default gateway (factory
default setting: 0.0.0.0)
User Name
User name for log-in (factory
default setting: admin)
Password
Password for log-in (factory
default setting: model name
“pxw-x320”)
Summary of Contents for PXW-X320
Page 223: ......
