86
You can use a device, such as a smartphone,
tablet, or computer, to configure and control a
wireless LAN connection. For details, refer to the
Operating Instructions or Installation Manual of
the optional CBK-WA101 Wireless Adapter.
You can record proxy files to an SD card in the
optional CBK-WA101 Wireless Adapter.
To record proxy files, use the following settings
in the setup menu.
• Set “MAINTENANCE” > “Camera Config” >
“SDI Rec Control” to “Para Rec.”
• Set “MAINTENANCE” > “Camera Config” >
“Match Clip Name” to “On.”
You can transfer proxy files (low resolution)
recorded on the SD card of an optional
CBK-WA101 Wireless Adapter, and original
files (high resolution) recorded on the camcorder,
to a server.
You can create a stream (H.264) of the camera
picture or playback picture of the camcorder for
monitoring and live logging from a device using
the “Content Browser Mobile” application.
You can stream high-quality video using an
optional Sony PWS-100RX1 Network RX
Station as a Connection Control Manager (CCM)
connected with an optional CBK-WA101
Wireless Adapter used in network client mode.
This application allows you to configure the
camcorder and remotely control the camcorder
while viewing a stream on the screen of the
device.
Check the version of the “Content Browser
Mobile” application and use the latest version.
For details about the “Content Browser Mobile”
application, contact a Sony service representative.
Also, refer to the Operating Instructions of the
optional CBK-WA101 Wireless Adapter.
Partial transfer of a proxy file
You can transfer a cutout part of a file by
specifying In and Out points in the proxy file.
You can also transfer the cutout parts of multiple
files using the Storyboard.
Notes
• The created clip has margins of up to 15 frames added
to both ends of the trimmed clip.
• If a proxy file recorded using CBK-WA101 (sold
separately) software (V1.3) or earlier is trimmed, it
may not be able to be imported into a non-linear editor.
Partial transfer of an original file
recorded on this unit
You can transfer a cutout part of a file by
specifying In and Out points in the original file
recorded by this unit. You can also transfer the
cutout parts of multiple files using the
Storyboard.
The following original file formats are supported.
• exFAT mode: XAVC-I/XAVC-L50, 35, 25/
MPEG2 HD422/MPEG2 HD420HQ
• UDF mode: MPEG2 HD422/MPEG2
HD420HQ
Notes
• For partial transfer of an original file, first record the
original file and proxy file with the same name using
the following settings.
- Set “MAINTENANCE” > “Camera Config” > “SDI
Rec Control” to “Para Rec.”
- Set “MAINTENANCE” > “Camera Config” >
“Match Clip Name” to “On.”
• The following operations are not supported during
partial transfer of an original file.
- Clip operations
- Media formatting
Connecting by Wireless LAN
using the CBK-WA101
Recording Proxy Files (Low
Resolution)
Transferring Files
Monitoring
High-Quality Streaming using
Sony QoS Technology
Using the “Content Browser
Mobile” Application
Summary of Contents for PXW-X320
Page 223: ......
