000
1. Overview: Screen Display
14
Status
display
State
Description
Address
Error
CCM address
error
The host name or IP
address of the CCM
to connect may be
incorrect. Check
that the setting is
correct.
Auth.
Failed
CCM user name/
password error
The user name or
password used to
connect to the CCM
may be incorrect.
Check that the
setting is correct.
No Inet
Access
Internet
connection error
Cannot connect to
the network. The
network settings
may be incorrect.
Check the network
settings.
Cert. not
Valid
CCM
certification not
valid error
The CCM certificate
is not valid. The date
setting may be
invalid. Check the
date setting.
Assignable Button Status screen
Displays the names of functions assigned to
assignable switches.
Battery Status screen
Displays the status of the battery attached to the
camcorder.
Display item
Description
Detected
Battery
Detected type of the battery
Remaining
Remaining capacity (%)
Charge Count Number of recharges
Capacity
Remaining capacity (Ah)
Voltage
Voltage
Manufacture
Date
Date of battery manufacture
Power Source
Power supply source
Supplied
Voltage
Supplied power source voltage
Media Status screen
Displays the status of the recording media.
Display item
Description
SxSA
Remaining capacity (bar graph
and remaining time display) and
media life of media in slot A
SxSB
Remaining capacity (bar graph
and remaining time display) and
media life of media in slot B
SD Proxy
Remaining capacity (bar graph
and remaining time display) and
media life (displayed only if
available) of media in PROXY SD
card slot
SD Utility
Remaining capacity (bar graph
and remaining capacity) and
media life (displayed only if
available) of media in UTILITY SD
card slot
A mark is displayed if the media is protected.
Viewfinder Screen
The viewfinder screen displays images during
shooting (recording or recording standby)
and playback with camcorder information
superimposed on the display.
You can toggle the display of information on/off
using the DISPLAY switch.
The information to display is linked to the settings
in Operation >Super Impose in the setup menu,
and the settings of the corresponding switches.