000
7. Menu Display and Settings: Menu List
92
Paint Menu
Default values are shown in
bold
.
Paint >Switch Status
Turns various correction functions and the test signal on/off.
Item
Setting
Description
Gamma
On
/Off
Turns the gamma function on/off.
Black Gamma
On/
Off
Turns the black gamma function on/off.
Matrix
On/
Off
Turns the matrix function on/off.
Knee
On
/Off
Turns the knee function on/off.
White Clip
On
/Off
Turns the white clip function on/off.
[Note]
If set to Off, it is reset to On when power is next turned
on.
Detail
On
/Off
Turns the detail function on/off.
Aperture
On
/Off
Turns the aperture function on/off.
Flare
On
/Off
Turns the flare correction function on/off.
Test Saw
On/
Off
Turns the test signal on/off.
Paint >White
Sets the color temperature, and adjusts white balance manually.
Item
Setting
Description
Color Temp <A>
1500K to
3200K
to 50000K
Displays the white balance color temperature
saved in memory A.
Color Temp Balance
<A>
–99 to
±0
to +99
Sets the white balance gain value saved in
memory A (linked to R gain and B gain).
R Gain<A>
–99 to
±0
to +99
Sets the white balance R gain value saved in
memory A.
B Gain<A>
–99 to
±0
to +99
Sets the white balance B gain value saved in
memory A.
Color Temp <B>
1500K to
3200K
to 50000K
Displays the white balance color temperature
saved in memory B.
Color Temp Balance
<B>
–99 to
±0
to +99
Sets the white balance gain values saved in
memory B (linked R gain and B gain).
R Gain <B>
–99 to
±0
to +99
Sets the white balance R gain value saved in
memory B.
B Gain <B>
–99 to
±0
to +99
Sets the white balance B gain value saved in
memory B.
Paint >Black
Sets the black level (image level without lighting).
You can achieve a desired look by adjusting the black level for deeper or shallower blacks.
Item
Setting
Description
Master Black
–99 to
±0
to +99
Sets the master black level.
R Black
–99 to
±0
to +99
Sets the R black level.
B Black
–99 to
±0
to +99
Sets the B black level.
Paint >Flare
Makes settings related to flare correction.
Flare is a phenomenon where the video level increases across the entire image due to the effects of bright
regions in the image, increasing the brightness of darker regions and reducing contrast. It is caused by
reflected light inside the lens.
Item
Setting
Description
Setting
On
/Off
Turns the flare correction function on/off.
Master Flare
–99 to
±0
to +99
Sets the master flare correction level.
R Flare
–99 to
±0
to +99
Sets the R flare correction level.
G Flare
–99 to
±0
to +99
Sets the G flare correction level.
B Flare
–99 to
±0
to +99
Sets the B flare correction level.
Paint >Gamma
Makes settings related to gamma correction.
Gamma correction allows you to adjust the contrast of the image to significantly alter the impression of an
image.
Item
Setting
Description
Setting
On
/Off
Turns the gamma correction function on/off.
Step Gamma
0.35 to
0.45
to 0.90
(0.05 steps)
Sets a gamma correction value in 0.05 steps.
Master Gamma
–99 to
±0
to +99
Sets the master gamma level.
R Gamma
–99 to
±0
to +99
Sets the R gamma level.
G Gamma
–99 to
±0
to +99
Sets the G gamma level.
B Gamma
–99 to
±0
to +99
Sets the B gamma level.
Gamma Category
STD
/HG/User
Selects the gamma category.
STD: Standard gamma curve for video signals
HG: Gamma curve that imitates gradation and
color reproduction of shooting with film
User: User-defined gamma curve created using
CvpFileEditorTM V4.2
