background image

PXW-Z750

Introduction

This document describes the procedure for 

upgrading the PXW-Z750 to the latest version.

First save the upgrade data to an SD card, and 

then use the menu to perform the upgrade.

For details on using menus, refer to the operating 

instructions manual.

Upgrade Procedure

Upgrade the version using the following 

procedure.

1

Check the current version “Checking the 

Current Version”.

2

Upgrade the camcorder to the latest version 

“Upgrading the Camcorder to the Latest 

Version”.

3

Upgrade the network function to the latest 

version “Upgrading the Network Function to 

the Latest Version”.

Getting Started

Notes on Performing Upgrade

• For details about obtaining the upgrade files, 

contact your Sony dealer.

• Be sure to use the AC adaptor (AC-DN10/DN10A 

or AC-DN2B) when performing the upgrade. If a 

battery is attached at the same time, upgrading 

is still supported if the AC power supply is 

interrupted.

• Disconnect connected devices (such as USB 

wireless LAN module (IFU-WLM3), SDI, HDMI, 

microphone, viewfinder, and lens) and eject any 

media in the SxS memory card slots before 

upgrading.

• Upgrading of the camcorder and network 

function are not possible if the streaming 

function is enabled. First, disable the streaming 

function by setting the following menu settings 

to Off.

– Maintenance >Streaming >Setting

– Maintenance >Network Client Mode >Setting

• Check the operation of the camcorder before 

using the camcorder after upgrading.

For details about using the camcorder, refer to the 

operating instructions manual.

About the Required SD Cards

Prepare an SD card for each step shown in the 

following table, and use each card only in the 

corresponding procedure.

• For details about supported SD cards, refer to 

the operating instructions manual.

• Always use SD cards that are formatted using 

the format function of the camcorder.

• When copying an upgrade file to an SD card, 

copy the file directly to the card without creating 

any folders.

Do not copy multiple files (with .bin file name 

extension) to the same SD card.

Current version

SD card slot

SD card

All versions

UTILITY SD card 

slot

Camcorder 

upgrade SD card

All versions

PROXY SD card 

slot

Network function 

upgrade SD card

Notes

© 2020 Sony Corporation

5-021-420-

11

 (1)

Summary of Contents for PXW-Z750

Page 1: ...finder and lens and eject any media in the SxS memory card slots before upgrading Upgrading of the camcorder and network function are not possible if the streaming function is enabled First disable the streaming function by setting the following menu settings to Off Maintenance Streaming Setting Maintenance Network Client Mode Setting Check the operation of the camcorder before using the camcorder...

Page 2: ...ly restart during the upgrade process and the upgrade continues Do not turn off the power Do not operate the camcorder during the upgrade Doing so could interrupt the upgrade process and cause a malfunction If the upgrade fails the REC indicator flashes at 4 times per second If an error occurs see Resolving Errors If the upgrade process has not completed after the specified required time has elaps...

Page 3: ... confirmation screen appears Please use the AC adapter Version Upgrade 7 Select Execute The upgrade begins and the following message appears Version Upgrade Elapsed Time xx xx xx Executing xx xx xx xx elapsed time format xx progress rate Do not operate the camcorder during the upgrade Doing so could interrupt the upgrade process and cause a malfunction When the upgrade ends the following message a...

Page 4: ...rect file to the SD card restart the camcorder and then try upgrading again If the upgrade failed If the upgrade fails the following message appears Version Upgrade Error If upgrading the camcorder disconnect and reconnect the AC power supply and perform the upgrade again If upgrading the network function check the upgrade procedure and perform the upgrade again ...

Reviews: