perform a reset using Maintenance >Network Reset
in the setup menu. In this case, the network
settings must be reconfigured. For details about
reconfiguring, refer to “Network Configuration” in
the operating instructions manual.
1
Check the current version of the network
function.
1-1 Set Operation >Proxy Recording Mode
>Setting in the setup menu to On, and
wait about 45 seconds.
1-2 Select Maintenance >Version in the setup
menu, and check the version displayed in
Net-Func Version Number.
The following steps are not required if already
upgraded to the latest version.
2
Download the ZIP file from the upgrade file
download site to your computer, and extract
all files.
3
Attach an AC adapter to the camcorder,
connect it to an AC power supply, and turn on
the camcorder.
4
Insert the SD card in the PROXY SD card slot,
and select Operation >Format Media >SD
Card(Proxy) in the setup menu to format the
SD card.
5
Eject the SD card from the camcorder and load
it on your computer, then copy the version
upgrade file (.bin file name extension) extracted
in step
2
to the root directory of the SD card.
Do not save any files other than the upgrade
file above on the SD card. The version upgrade
will not be performed correctly if there any
other files are on the SD card.
6
Insert the SD card in the PROXY SD card slot,
select Maintenance >Version >Net-Func Ver.
Up in the setup menu, and select [Execute].
An upgrade confirmation screen appears.
Please use the AC adapter
Version Upgrade
7
Select [Execute].
The upgrade begins, and the following
message appears.
Version Upgrade
Elapsed Time xx:xx:xx
Executing... xx%
(xx:xx:xx elapsed time format, xx% progress
rate)
Do not operate the camcorder during the
upgrade. Doing so could interrupt the
upgrade process, and cause a malfunction.
When the upgrade ends, the following
message appears.
Version Upgrade
OK
Turn Power Off
8
Turn the camcorder off, and eject the SD card.
Ejecting the SD card while the camcorder is
turned on may display a warning message
(E91-1C0) in rare cases. Restart the camcorder
to clear the message.
9
Turn the camcorder on.
10
Wait about 45 seconds, select Maintenance
>Version in the setup menu, and check that
the version displayed in Net-Func Version
Number is the latest version.
11
Turn the camcorder off.
Resolving Errors
Use the following method to resolve errors if an
error occurs.
If the upgrade is still unsuccessful after
attempting to resolve the error, contact your Sony
dealer.
If the upgrade data is not found
If the version upgrade file is not detected, the
following message appears.
Version Upgrade No File
Check the upgrade file on the SD card, and then
try upgrading again.
Note
Note
Note
Note
Note
Problem
Solution
Version upgrade file is not
at the top level on the SD
card.
(File is in a folder.)
Copy the file to the top
level on the SD card.
The file is for a different
device.
Copy the correct file to the
SD card.
The ZIP file has not been
uncompressed.
Uncompress the ZIP file,
and copy the file (.bin file
name extension) to the SD
card.
