12
GB
QN-022PCM 3-860-382-11
GB
Outgoing calls
When making a call with CMD-Z1, a service will be selected
according to the setting of Fax/Data menu.
•Speech Only
When making a call with your CMD-Z1, speech service is
selected. After the call is established, speech communication
will be available.
When making a call from a terminal or fax software on the PC
which is connected to your CMD-Z1, the software will either
select fax or data service according to its configuration.
•Speech Then Fax
When making a call with your CMD-Z1, you will be able to
talk.
After the call is established, speech communication will be
available at first.
You can send a fax message, when the PCMCIA card is
connected to your CMD-Z1 and your fax software is activated
in correct way.
When making a call from a fax software on the PC which is
connected to your CMD-Z1, you will not be able to talk. When
the call is established with speech, your CMD-Z1will
automatically change to fax communication in a few seconds.
When making a call from a terminal software on your PC, this
setting is ignored.
The data service is selected.
•Fax/Data Only
Operation is same as “Speech Only”
IMPORTANT
“Speech Then Fax” is based on a teleservice, alternate
speech/fax(TS61) on GSM Recommendation. This service
varies depending on the Network Operator.
Please check with your Network Operator if this service is
available. If this service is not supported by your Network
Operator and this option is chosen, you will not be able to
make any calls nor receive calls.
Summary of Contents for QN-022PCM
Page 2: ...QN 022PCM 3 860 382 11 ...
