RB1G
CHASSIS
W600A/ W603A/ W605A/ W607A/ W650A/ W651A/ W653A/
W654A/ W655A/ W656A/W657A/ W658A/ W670A/ W674A
DIGITAL SERVICE
001 OP
000 VERS ---
<MAIN> <EXT>
DM1.301W00AA WF:2.0.0.99
WF1.003W00AA WF:--------
DF1.001W00AA FD:0.068
YM1.010W00AA BT:
M4.922C
1.2.14.891
(DM1.301W00AA)
DD1.016W00AA
PK0.312W00AA
AM0.510WW
MID:04835511
PID:04020000
PNL:LTY320AB01
DQ3Y550LN0101
219
SECTION 4
SERVICE ADJUSTMENTS
4-1. Accessing Service Mode
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “” then “TV power” on remote.
3) You can see Service Mode on display.
* The above operation should be finished within 15 seconds after
the set go to STBY
mode
Remote Commander
Screen Sample
Remote Commander
(i+)
Vol (+)
TV Power
1
2
3
4
4-2. Transition of Each Micro’s Service Mode
OPTIONS
1.
First of all, when you enter Service Mode, you can
see “Digital” service mode.
2.
Whenever you press “OPTIONS” on remote, service
mode is changed according to the flow below:
p.5-6
“Chassis” & “VPC”
p.7-9
“Digital” service mode
Digital” -> “Chassis” -> “VPC”
1. Change Data of
“Chassis”
or
“VPC”
service mode
a.
Press “2 / 5” on remote to select (up / down) category.
b.
Press “1 / 4” on remote to select (up / down) Item.
c.
Press “3 / 6” on remote to change (up / down) data.
4-3. Change Data by Service Mode 1
CHASSIS
SERVICE
000
WYVERN
000
S2_NOISE_TH 32
Press 2: increment
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 3: increment
Press 6: decrement
CHASSIS Service menu
a
b
c
Remote Commander
4-4.Save Changing Data by Service Mode 1
CHASSIS
WRITE
000
WYVERN
000
S2_NOISE_TH 32
CHASSIS Service menu
a
b
Remote Commander
2.
Write data for
“Chassis”
or
“VPC”
service mode.
a.
Press “Mute” on remote.
It shows green “SERVICE” changes to green
“WRITE”.
b.
Press “0” on remote. Green “WRITE” changes to
red “WRITE”. It indicate writing is processing.
c.
After a while, red “WRITE” changes to green
“SERVICE”. Writing process is done at this point.
3.
TV reboot is necessary for applying data change.