RB1G
CHASSIS
W600A/ W603A/ W605A/ W607A/ W650A/ W651A/ W653A/
W654A/ W655A/ W656A/W657A/ W658A/ W670A/ W674A
4-6. Save Changing Data by Service Mode 2
221
Service Adjustment
4-6 Save Changing Data by Service Mode 2
1.
In
“Digital”
service mode ( “002 MODEL” category)
000 SEGSelect segment information
001 DEST Select destination information
002 MODELNAME Select Model Name
003 SERIAL Can be set Only Once for the new board
005 VAR_TYPE Select variable information
a.
Change data for each model. (Refer previous mode.)
b.
Press “Mute”, “0” on remote sequentially. Red “WRITE” is
shown. This indicates writing is in process.
c.
After a while, red “WRITE” disappears. Green Done will be
displayed for a while, which means writing process is done.
d.
For the items SEG, DEST, MODELNAME after changing
each item, service save (“mute”+”0”) is required. For the
item SERIAL, after inputting the serial number, press key
“12” or “Enter” to save the data.
-Please save the items according to the sequence “SEG ->
DEST -> MODELNAME
-When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“ and "MODELNAME“ is OK.
DIGITAL
SERVICE
002 MODEL
000 SEG
HG_BASE
Write
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---
DIGITAL Service menu
a) Only when B* board is replaced.
Remote Commander
a
a
a
b
b
In “
Digital”
Service Mode,
a.
Select
“002 MODEL”
category by pressing “2” and “5” on remote
b.
Press “1” or “4” on remote to select 005 VAR_TYPE
c.
Change data by pressing “3” or “6” on remote.
d.
After data is selected, press “Mute” then “0”.
e.
When Smart Core Green and Amber LED blink alternately, insert USB
with software.
f.
After a few minutes, Smart Core White LED will lit.
g.
TV reboots itself and goes to standby mode.
h.
Turn on TV by “Power” key on TV or “Power” button on remote. Message
of Software Update completion will appear.
i.
Disconnect USB.
j.
001 DEST update is necessary if VAR_TYPE is changed from STD to UC
orvice versa
(* Please check with Service HQ for the latest/updated Software update)
b) Only when B board is replaced.
& VAR_TYPE change is necessary
DIGITAL
SERVICE
002 MODEL
005 VAR_TYPE STD
VIDEO: DYNAMIC AUDIO:DYNAMIC
PSAVE:STANDARD
MAIN:
SUB:
TUNER/----/----- -----/----/NTSCU
----x----/------ ----x----/------
-----/---
-----/---
DIGITAL
Service menu