41
RCD-W10
4-3. CD-RW Playback Adjustment
1)
Select the menu as follows. Control
→
Macro, and select 03cdr_S.ttl.
Press “Open”.
4
Fig. 4-27
2)
Place the test CD TCD-W091W on the tray as prompted by
the display and press “OK”.
(Fig. 4-27)
3)
Press the “RESET” button (SW101) of the jig as prompted by the display.
4)
As prompted by the message shown in Fig. 4-29, check that
the waveform as shown in Fig. 4-28 appears on an oscilloscope.
5)
As prompted by the message shown in Fig. 4-31, check that
the waveform as shown in Fig. 4-30 appears on an oscilloscope.
6)
As prompted by the message shown in Fig. 4-33, check that
the waveform as shown in Fig. 4-32 appears on an oscilloscope.
4
Fig. 4-29
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-28
4
Fig. 4-31
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-30
4
Fig. 4-33
RF signal waveform
VOLT/DIV : suitable value
TIME/DIV : 500ns
4
Fig. 4-32
Summary of Contents for RCD-W10 - Cd/cdr Recorder/player
Page 17: ...17 RCD W10 MEMO ...
Page 52: ...52 RCD W10 MEMO ...
