Sony RDH-GTK37iP Operating Instructions Manual Download

Page: 19 / 36

Blue

too
th

For an NFC-compatible
smartphone

Touch the smartphone to the N-Mark on
the system to establish the

Bluetooth

connection.
Start playback of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.

To disconnect the

Bluetooth

device

For a

Bluetooth

device

Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display
panel.
Depending on the

Bluetooth

device, the

Bluetooth

connection may be canceled

automatically when you stop playback.

For an NFC-compatible
smartphone

Touch the smartphone to the N-Mark on
the system again.

Use the buttons on the unit to perform this
operation.

Press BLUETOOTH to select

Bluetooth

function.

“BT AUDIO” appears in the display
panel.
If the system is connected to a

Bluetooth

device, the

Bluetooth

device

name appears in the display panel.
Press BLUETOOTH to disconnect the

Bluetooth

device.

When holding down

, press

"/1

for about 3 seconds.

“BT HIST” and “CLEAR” appear in
the display panel and all the pairing
information is erased.

Setting the

Bluetooth

audio codecs

You can select the

Bluetooth

audio codecs

when the connected

Bluetooth

device

supports Advanced Audio Coding
(AAC).

Press OPTIONS.

Press

repeatedly to select

“BT AAC”, then press

Press

repeatedly to select

“ON” or “OFF”.

• ON: Advanced Audio Coding

(AAC) is selected if the

Bluetooth

device supports AAC.

• OFF: Sub Band Codec (SBC) is

selected.

Notes

• You can enjoy high quality sound if the AAC

is selected. In case you cannot listen to AAC
sound from your device, select “OFF”.

• If you change this setting while the system is

connected to a

Bluetooth

device, the

Bluetooth

device will be disconnected. To

connect to the

Bluetooth

device, perform the

Bluetooth

connection again.

Setting/Canceling

Bluetooth

standby

mode

The system goes into

Bluetooth

standby

mode and waits for a

Bluetooth

connection, even when the system is
turned off.

Press OPTIONS.

Press

repeatedly to select

“BT STBY”, then press

Erasing all the pairing
registration information

Summary of Contents for RDH-GTK37iP





































Search results

Summary of Contents for RDH-GTK37iP

Reviews:

Related manuals for RDH-GTK37iP

Brands by name

Popular brands

Sony RDH-GTK37iP, Operating Instructions Manual

Search results

Summary of Contents for RDH-GTK37iP

Reviews:

Related manuals for RDH-GTK37iP

Brands by name

Popular brands