background image

13

GB

G

e

ttin
g

 St
ar
ted

Note for iPod nano model users

Do not install the system vertically when using 
iPod nano models with this system. iPod nano 
models cannot be secured with the holding arm 
because of their height. Install the system 
horizontally.

Note on carrying the system

Do not carry the system with the iPod/iPhone 
connected. Otherwise, the iPod/iPhone may fall 
and be damaged. Sony cannot accept 
responsibility for any damage caused by 
inappropriate usage.

Notes

• When using commercially available iPod/

iPhone cases, the connected iPod/iPhone may 
not be recognized by the system. If this 
happens, remove the case from the iPod/
iPhone and reconnect it to the Terminal for 
Apple Device.

• When using a vertically installed system, 

make sure that the connected iPod/iPhone 
remains upright, not tilted.

Connect the iPod/iPhone to the 

 port 

using USB cable supplied with your iPod/
iPhone.

Setting the clock

You cannot set the clock in Power Saving 
Mode.

1

Press 

"/1

 to turn on the system.

2

Press TIMER MENU.

If “PLAY SET” appears in the display 
panel, press 

/

 repeatedly to

select “CLOCK”, then press

 

.

3

Press 

/

 repeatedly to set the 

hour, then press 

.

4

Press 

/

 repeatedly to set the 

minutes, then press 

.

When connecting to the 

 

port

iPod/iPhone 
(not supplied)

USB cable 
(not supplied)

Summary of Contents for RDH-GTK37iP





































Reviews: