78
Specifications
System
Laser:
Semiconductor laser
Channel coverage:
PAL (B/G, D/K, I)
VHF: E2 to E12, R1 to R12, Italian A
to H, Ireland A to J, South Africa 4 to
13
UHF: E21 to E69, R21 to R69, B21 to
B69
CATV: S01 to S05, S1 to S20
HYPER: S21 to S41
The above channel coverage merely ensures
the channel reception within these ranges. It
does not guarantee the ability to receive
signals in all circumstances. For details, see
“Receivable channels” (page 58).
Video reception:
Frequency synthesizer
system
Audio reception:
Split carrier system
Aerial out:
75-ohm asymmetrical aerial
socket
Timer:
Clock: Quartz locked/Timer
indication: 24-hour cycle (digital)/
Power back-up duration: 1 hour
Video recording format:
MPEG-2,
MPEG-1
Audio recording format/applicable
bit rate:
Dolby Digital 2 ch
256 kbps/128 kbps (in EP and SLP
mode)
Inputs and outputs
LINE 2 OUT
(AUDIO):
Phono jack/2 Vrms/10 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 2 IN
(AUDIO):
Phono jack/2 Vrms/more than
22 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 1 – TV:
21-pin
CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3/DECODER:
21-pin
CVBS IN/OUT
S-Video/RGB IN
(RGB signals cannot be recorded)
S-Video OUT (downstream)
Decoder
DIGITAL OUT (COAXIAL):
Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
B
/C
B
, P
R
/C
R
):
Phono jack/Y: 1.0 Vp-p,
P
B
/C
B
: 0.7 Vp-p,
P
R
/C
R
: 0.7 Vp-p
General
Power requirements:
220-240 V AC,
50/60 Hz
Power consumption:
20 W
Dimensions (approx.):
430
×
58
×
291 mm (width/height/
depth) incl. projecting parts
Mass (approx.):
3.1 kg
Operating temperature:
5ºC to 35ºC
Operating humidity:
25% to 80%
Supplied accessories:
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to
change without notice.
Compatible colour systems
This recorder is designed to record using the
PAL colour system and play back using the
PAL or NTSC colour systems.
