85
US
Set
tin
gs
a
nd
Adj
u
st
m
e
n
ts
Format DVD-RW (DVD-RWs only)
Selects the recording format for an unused DVD-
RW, when first inserted.
Auto Finalize
Set Top Box Control
You can control your cable box/satellite receiver
using the supplied set top box controller. See
“Step 7: Easy Setup” for details. Press ENTER,
and select “On” or “Off.”
When “Set Top Box Control” is set to “On,” you
can make the following settings. Note that when
you change “Set Top Box Control” to “On” or
“Off,” all timer recording settings will be
canceled.
◆
Brand Code
See “Cable Box/Satellite Receiver Brand Code”
(page 101) for the brand code for your cable box
or satellite receiver, and enter the code using the
number buttons and ENTER.
◆
Connections
Selects the connection you used for your cable box
or satellite receiver. Select the connection from
“Line1” or “Line2.”
◆
Ch. Digit lock
Allows you to select whether to fix the digits for
your cable box or satellite receiver.
◆
Mode for SET button
Select “Mode 1” or “Mode 2” if your cable box or
satellite receiver requires pressing an ENTER
button or a SET button etc., after entering the
channel number. If “Mode 1” does not work, try
“Mode 2.” If your cable box or satellite receiver
does not respond to either setting, contact the
manufacturer of the cable box or satellite receiver.
Control for HDMI
Language Follow
Notes
• Turn off any display before turning on this function.
• The OSD language for the recorder keeps if the TV’s
language cannot be supported.
VR
Automatically formats the disc in
VR mode.
Video
Automatically formats the disc in
Video mode.
On
Automatically finalizes a DVD-R
(Video mode)/DVD-RW (Video
mode)/DVD+R after recording,
allowing immediate playback on
other DVD equipment (page 67).
Off
Turns off the function.
On
Turns on the cable box/satellite
receiver control function. See
“Using the cable box/satellite
receiver control function”
(page 12).
Off
Turns off the cable box/satellite
receiver control function. Select
this if you do not want to use the
supplied set top box controller.
Off
Select this when your cable box or
satellite receiver only accepts a
three or more digit channel
number. Normally select this.
Lock to
2 digits
Select this only when your cable
box or satellite receiver only
accepts a two digit channel
number.
Off
No code is sent when SET is
pressed. Normally select this.
Mode 1
Sends the channel number you
entered.
Mode 2
Sends the channel number you
entered.
On
Allows you to use the Control for
HDMI function (page 16).
Off
Turns off the function.
On
Switches the language of this
recorder to the same as the
current TV’s OSD language. You
cannot select this when “Control
for HDMI” is set to “Off.”
Off
Turns off the function.
Summary of Contents for RDR-GX360
Page 5: ...5US ...
Page 29: ...Hookups and Settings 29US ...
Page 128: ...Sony Corporation Printed in China AK68 01519A ...