20
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Step 6: Initial Setup
Make the basic adjustments by following the on-
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
1
Turn on the recorder and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The [LANGUAGE] display appears.
2
Select a language for the on-screen
displays using
M
/
m
, and press ENTER.
3
Check the antenna connection according to
the display, and press ENTER.
4
While [Start] is selected, press ENTER.
The Auto Channel Setting starts.
To cancel the Auto Channel Setting, select
[Cancel] and press ENTER.
To set the programme positions manually, see
page 67.
When the Auto Channel Setting finishes, the
[Clock Setting] display appears.
Changing programme positions of
the recorder using the remote
1
2
3
4
5
6
7
8
9
0
[
/
1
<
/
M
/
m
/
,
,
ENTER
O
RETURN
TV
[
/
1
