70
b
Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with DTS signals, select [Off].
[MPEG Output] (DVD VIDEO only)
Selects the type of MPEG audio signal.
b
Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with MPEG audio signals, select [MPEG
t
PCM].
[96kHz PCM Output] (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
b
Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with 96 kHz signals, select [96kHz
t
48kHz].
[Audio DRC] (Dynamic Range Control) (Dolby
Digital DVDs only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
[Audio DRC]. This affects the output from the
following jacks:
– AUDIO OUT (L/R) jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
– DIGITAL OUT (COAXIAL)/HDMI OUT jack
only when [Dolby Digital Output] is set to
[Dolby Digital
t
PCM] (page 69).
[Vocal] (Karaoke DVD only)
Mixes karaoke channels into normal stereo.
This function is effective for multi-channel
karaoke DVDs only.
[ MPEG
t
PCM ]
Select this when the recorder is
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals.
[ MPEG ]
Select this when the recorder is
connected to an audio component
with a built-in MPEG decoder.
[ 96kHz
t
48kHz ]
The audio signals of DVD
VIDEOs are always converted to
48 kHz/16 bit.
[ 96kHz ]
All types of signals, including
96 kHz/24 bit, are output in their
original format.
[ Off ]
Normally select this.
[ On ]
Makes low sounds clear even if
you turn the volume down.
[ Off ]
Does not mix karaoke channels
into normal stereo. You can turn
off the guide vocal on a multi-
channel DVD.
[ On ]
Normally select this.