background image

2

WARNING

To reduce the risk of fire or electric 
shock, do not expose this apparatus 
to rain or moisture.
To avoid electrical shock, do not 
open the cabinet. Refer servicing to 
qualified personnel only.
The mains lead must be changed 
only at a qualified service shop.

This appliance is classified as a 
CLASS 1 LASER product. The 
CLASS 1 LASER PRODUCT 
MARKING is located on the laser 
protective housing inside the 
enclosure.

CAUTION

The use of optical instruments with 
this product will increase eye 
hazard. As the laser beam used in 
this DVD recorder is harmful to 
eyes, do not attempt to disassemble 
the cabinet.
Refer servicing to qualified 
personnel only.

This label is located on the laser 
protective housing inside the 
enclosure.

Notice for customers in the 
United Kingdom and 
Republic of Ireland

A molded plug complying with 
BS1363 is fitted to this equipment 
for your safety and convenience.
Should the fuse in the plug 
supplied need to be replaced, a 5 
AMP fuse approved by ASTA or 
BSI to BS1362, (i.e., marked with 

 or 

 mark) must be used.

If the plug supplied with this 
equipment has a detachable fuse 
cover, be sure to attach the fuse 
cover after you change the fuse. 
Never use the plug without the fuse 
cover. If you should lose the fuse 
cover, please contact your nearest 
Sony service station.

Precautions

• This unit operates on 220 – 

240 V AC, 50/60 Hz. Check that 
the unit’s operating voltage is 
identical with your local power 
supply.

• To prevent fire or shock hazard, 

do not place objects filled with 
liquids, such as vases, on the 
apparatus.

• Install this system so that the 

mains lead can be unplugged 
from the wall socket 
immediately in the event of 
trouble.

GUIDE Plus+, VIDEO Plus+, G-
LINK are (1) registered trademarks 
or trademarks of, (2) manufactured 
under license from and (3) subject 
of various international patents and 
patent applications owned by, or 
licensed to, Gemstar-TV Guide 
International, Inc. and/or its related 
affiliates.

GEMSTAR-TV GUIDE 
INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES 
ARE NOT IN ANY WAY 
LIABLE FOR THE ACCURACY 
OF THE PROGRAM 
SCHEDULE INFORMATION 
PROVIDED BY THE GUIDE 
PLUS+ SYSTEM. IN NO EVENT 
SHALL GEMSTAR-TV GUIDE 
INTERNATIONAL, INC. AND /
OR ITS RELATED AFFILIATES 
BE LIABLE FOR ANY 
AMOUNTS REPRESENTING 
LOSS OF PROFITS, LOSS OF 
BUSINESS, OR INDIRECT, 
SPECIAL, OR 
CONSEQUENTIAL DAMAGES 
IN CONNECTION WITH THE 
PROVISION OR USE OF ANY 
INFORMATION, EQUIPMENT, 
OR SERVICES RELATING TO 
THE GUIDE PLUS+ SYSTEM.

Disposal of Old Electrical 
& Electronic Equipment 
(Applicable in the 
European Union and 
other European countries 
with separate collection 
systems)

This symbol on the product or on 
its packaging indicates that this 
product shall not be treated as 
household waste. Instead it shall be 
handed over to the applicable 
collection point for the recycling of 
electrical and electronic 
equipment. By ensuring this 
product is disposed of correctly, 
you will help prevent potential 
negative consequences for the 
environment and human health, 
which could otherwise be caused 
by inappropriate waste handling of 
this product. The recycling of 
materials will help to conserve 
natural resources. For more 
detailed information about 
recycling of this product, please 
contact your local Civic Office, 
your household waste disposal 
service or the shop where you 
purchased the product.

Summary of Contents for RDR-HX525





























































































































Reviews: